|
|
Granulators: Range CentriCut |
|
 |
|
|
|
| The Special Granulator |
|
|
The CentriCut System feeds a consistent quantity of material through a screw into the center of the cutting chamber. At the same time the material is pre-cut in this initial operation. This process eliminates the potential for blockage in the cutting chamber. The material is then spun into the perimater of the cutting chamber due to the centrifugal force of the rotating blades. During each revolution 3 rotating and 4 fixed blades cut the material up to 12 times. Due to the centrifugal design practically no heat is generated during the operation of this machine.
|
|
 |
| |
Technical Data | Download Brochure
Inquiry |
| |
|
|
Features |
- 5 x more output than the
conventional granulator
- Low energy consumption
- Up to 3,300 lbs (1,500 kg)
- Output per hour with only
25 hp (18.5 kW)
- Easy access for maintenance
- Quick color change in minutes with
automatic self-cleaning system
- Plug and Play design with PLC
4 x indexable carbide cutters
- High quality granulates
with minimal dust and low noise |
|
 |
“Cutting From The Center”
The material is fed into the cutting chamber (2) by an endless screw (1) and pre-cut at the same time.
The material is spun through holes in the rotor (3) onto the edge of the cutting chamber (2) by centrifugal force.
When the rotor blades (4) and fixed blades (5) meet, the material is cut into granules, as defined by the screen hole size.
The finely cut end product leaves through the large screens (7), aided by a powerful integrated conveyor blower (6).
Thanks to the load dependent electronic control of the rotor (4) and the endless screw (1), the risk of blockage or material jamming is eliminated. |
| Top of page |
|
|
|
|
Technical Data (Extract) |
| Technical Data |
| |
CentriCut 33
|
| |
|
| Capacity/output: |
approx. 2,200 - 3,300 lbs
(1,000 kg - 1,500 kg/hr) < 8mm |
| Power motor: |
25 hp / 18.5 kW |
| Rotor diameter: |
413” / 330 mm |
| Weight: |
4,400 lbs / 2,000 kg |
|
|
|
|
|
|
|
