|
|
WPL 2000/800 und WPL 3000/800 |
|
 |
|
|
|
| Extremely high output rates, highly economical |
|
|
The Powerline shredder series are designed specially for the production of substitute fuels (RDF) and offer a wide variety of innovative equipment and ancillaries.
A high output rate for all types of materials such as industrial, household and bulk waste, mixed construction site waste, production rejects, timber, paper, paper rejects etc. guarantees a maximum rate of productivity. Low power consumption and low wear costs are the basis for the Powerline's economic efficiency. |
|
 |
|
Types | Pictures | Applications | Features | Technical Data
Download Brochure | Inquiry |
| |
|
Types |
|
|
| WPL 2000/800 | WPL 3000/800 |
|
|
|
|
Pictures |
 |
Example of a system for the production of substitute fuels
Top of page |
|
|
Applications |
Depending on the job on hand, the Powerline can be operated as an individual machine or as a main component of a complete system for the production of substitute fuels.
Direct loading by grabs, forklifts and buckets is possible with individual machines. This simple and economical installation possibility is recommended in particular for clean or slightly soiled materials. |
|
In the case of very dirty materials, the material is prepared for processing by pre-shredding and pre-treatment by screen, separator and magnet systems. As a part of a typical alternative fuels system, continuous loading of the Powerline is carried out by conveyor belt.
WEIMA offers its customers and system planners a competent and reliable partner for creating systems for the production of substitute fuels. |
 |
|
 |
WEIMA Powerline 3000/800 as an individual machine, loading by grabs, forklifts and buckets
Top of page |
|
WEIMA Powerline 3000/800 integrated into a complete system, loading by a conveyor belt |
|
|
Features |
 |
|
Single shaft shredder |
| The single shaft shredders of the new Powerline series were developed from the basis of installation experience and are designed specifically for the production of substitute fuels. Along with the material to be shredded, the throughput rate and material size range determines the individual specification of the machine. More than 40 different machine options are available. |
|
 |
|
Rotor |
| The rotor width of 2,000 mm or 3,000 mm and a diameter of 800 mm guarantee a large screen surface, an aggressive rotor action and, consequently, an extremely high output rate. The speed range of the highly abrasion resistant special rotor is between 80 - 200 rpm and can be regulated as required depending on the type of drive. |
|
 |
|
Knife system |
| The knife bearers are screwed or welded onto the rotor depending on requirements. The multi-turn and regrindable rotor knives, as well as the newly developed stator knife system guarantee a considerable reduction in wear costs. Various knife sizes and knife quality grades are also available for special areas of use. |
|
 |
|
Drive system |
| Various drive systems are available depending on specific tasks, required throughput rate and contamination of the material. A durable hydraulic drive system is available for highly contaminated feedstock. The electro-mechanical drive with frequency converter guarantees maximum throughput rates for clean and pre-treated materials. |
|
 |
|
Screen basket / Screens |
| The hydraulic swivel screen basket allows easy access to the rotor, knives and counter-knives. The resulting shortened set-up and cleaning times guarantee a high level of availability for the Powerline. The segmented screens allow a rapid screen change. Screen sizes between 15 mm and 100 mm are available. |
|
| WPL 2000/800 und WPL 3000/800 |
• Extremely high throughput rates
(depending on material type and screen size from 4,000 - 20,000 kg/h)
• Low power requirements for high economic efficiency
• Low wear costs through multiple-turn rotary knives and newly developed
stator knife system
• Easy tool change and high resistance to breakage of rotor
and stator knives ensure short set-up times
• Variety of drive concepts available (hydraulic drive or electro-mechanic drive
with or without frequency converter)
• Second control panel on the front side for extremely easy operation
• Sizes to match respective needs for high versatility
• Large inspection doors and hydraulic swivel screen basket simplify access
and maintenance
• Extremely sturdy and rugged construction
• Electromagnetic locking, limit switches and various emergency stop buttons
for a high level of operating safety
• Material feed possible by grabs, forklifts and buckets or conveyor belts
• Shredded material transported out by options of conveyor belt,
troughed chain conveyors or extractors
• Extensive and detailed documentation
• Spare part and service guarantee
Top of page |
|
|
Technical Data |
 |
WPL 2000/800
|
 |
| WPL 3000/800 |
|
| Type |
WPL 2000/800 |
WPL 3000/800 |
|
|
|
| Hopper opening (mm): |
2.750 x 2.650 |
3.750 x 2.650 |
| Feed opening (mm): |
2.000 x 1.885 |
3.000 x 1.885 |
| Standard hopper content (m³): |
4,8 |
7,2 |
| Rotor operating width (mm): |
2.000 |
3.000 |
| Rotor diameter (mm): |
800 |
800 |
| Power (kW): |
160, 200 |
2 x 110, 2 x 132 |
| Rotor speed (rpm): |
80 - 200 |
80 - 200 |
| Type / Size of knives (mm): |
Turnable cutting edges / 60x60, 80x80 |
| Screen size (mm): |
15 - 100 |
15 - 100 |
| Throughput rate (kg/h)*: |
3.000 - 15.000 |
5.000 - 20.000 |
| Connected load (Volt/Hz): |
400 ± 5% / 50 |
400 ± 5% / 50 |
| Weight (approx. kg): |
20.000 - 25.000 |
35.000 - 40.000 |
|
|
|
| * The work rates can be influenced in particular by the following factors: powder density, size of material to be shredded, screen size, delivery form, etc. |
|
|
|
|
Top of page |
|
|
|
|
|
|
|
|
